This is my first post so I am new to the forum. I recently purchased my 26 Superior V, 4 dr sedan from a lady who had purchased it from her grandfathers estate in order to keep it in the family. The grandfather purchased it in the 1960's and he passed away in 2023. The surviving family seems to know almost nothing about the car except it was Granpaw's pride and joy. It has not been started nor driven for at least 15 years. None of the family even knew how to start it. I am taking steps to get it running; changing all the fluids, lubricating the cylinders and lifters, new battery, repairing rotted and frayed wiring, etc. The vehicle is suprisingly quite original and had been restored by "Granpaw" in about 1968 and used for "display" purposes and occasional drives and always stored inside so it is in rather remarkable shape. The coolant had apparently been drained sometime during the past 15 years so I desire to flush the system and have recently read the rather recent post regarding flushing with water and air only. There is a plate on my radiator stamped with a date of 1926, thus, I am presuming it is the original radiator so I am sensitive about how I go about flushing it.
I am not a collector but I do have a couple of 50is year old vehicles I use and care for and I refurbished a 55 Studebaker pickup for a daughter. My purpose in providing this background is because I hope to seek guidance and advice from this seasoned and knowledgeable group to help me succeed in making my 26 a good runner and keep it as original as possible.
I welcome any comments regarding my approach thus far.
Thanks in advance.
Rod in Thompson Falls, Montana
@rodknu-2 Welcome Rod! I have no personal experience with a '26 so I can't help you with anything other than generalities, but, fear not, help will be along soon.
7046 old site posts
Save a life, adopt a senior shelter pet
There are many good people. If you can't find one, be one.
1938 Master Business Coupe-Sold, now living in New Jersey
1953 210 Sedan
Welcome! Be careful with the air on the radiator the old radiators could be damaged with too much shop air. I remember reading no more than 1 psi but I would double check that. I have had good luck using the over the counter flushing chemicals.
Good luck and keep letting us know how you are doing.
Dave
@rodknu-2 @tiny Ron, Welcome to the forum. I like your plan. Like Tiny, I'm not well versed in the 4 cylinder era Chevys but as with anything else, Fuel, Spark, and Air are the basic requirements. Be sure to learn about the spark advance lever positioning before attempting start-up. Everything else should work the same as the cars you mentioned.
Keep us posted and PICTURES!!! when you can.
Mike
Many Miles of Happy Motoring
3469 Posts on Old VCCA Chat
@rodknu-2, I also welcome you to the forum and the wonderful world of old Chevys!
This forum website is relatively new. The old forum website (vccachat.org) is packed with a lot of info and discussions that are very useful. We are hoping to migrate all of that content over here, but logistics are still being worked out. Here are some hints and tips on how to use the Search Function of the old website to find the info you want: https://vccachat.org/ubbthreads.php/topics/366696/search-function-tips.html
My 1928 Canopy Express (Justin) sat for 54 years before I got him. Here's a summary of my adventure getting him back on the road: https://www.stovebolt.com/gallery/meltz%20dean%201928.html
Here are a few links on vccachat.org that might be of interest:
- https://vccachat.org/ubbthreads.php/topics/359944/1927-landau-imperial-restore.html
- https://www.stovebolt.com/gallery/meltz%20dean%201928.html
- https://vccachat.org/ubbthreads.php/topics/303372/cold-start.html
- If you want a detailed description of what makes the 4 cylinder Chevy engines tick, read this series of posts: https://vccachat.org/ubbthreads.php/topics/386451/resurrecting-a-28-4-banger.html
Celebrate every inch you move forward, take LOTS of photos, and let us know how you're doing!
Cheers, Dean
Dean "Rustoholic" Meltz
San Leandro, CA
3511 posts on vccachat.org
Lurch -1927 LM one ton truck - tinyurl.com/Lurch-VCCACHAT-Gallery
Justin - 1928 AB Canopy Express (1/2 ton truck) - tinyurl.com/Justin-Stovebolt-Gallery
Thanks for the Welcome, guys! Will post some photos once I gain permission (or learn how).
Hi Rod. and welcome!
If you are referring to the post on water and air for radiator flushing that I think you are, then you already know that there is ZERO pressure built up in the radiator during that process (as the cap is off), so it is completely safe to use on old radiators, and is the ONLY process recommended by a very good radiator shop in my area that I trust. (It also worked very well for my 80 year old radiator)
As for the rest of the car, there are others here with more knowledge and experience with 4 cylinders than me, and I'm sure you'll get the help you need.
Have fun! 🙂
Ole S Olson
Saskatoon, Sask, Canada
1946 DR 3/4 ton stake
1139 old site posts
Yes, it was that post I was referring to. Thanks for once again pointing that out because I had begun to question whether I wanted to do that or not. I have progressed to filling with water and draining a few times. (Haven't found the drain for the block yet.... I have gotten a bit of rusty dusty sediment so I think the water air flush is definitely warranted. I also drained all the old gasoline from the tank (it was a very dark red color) and will remove the carburetor and give it a good soak in a carb cleaner.
note: I have a "you are not allowed to attach files on this forum. It is possible you have not reached the minimum required number of posts...." Other than that I have not seen any guidance on posting photos.....
Everyone who starts posting has to make 5 posts before they can upload photos. You're almost there! 😉
If you look below the 'Leave a reply' box, there is an 'Attach Files' link and the option to drag and drop photos or files. The maximum size for each photo or file is 5MB and you're allowed to post up to 10 such items per post.
Cheers, Dean
Dean "Rustoholic" Meltz
San Leandro, CA
3511 posts on vccachat.org
Lurch -1927 LM one ton truck - tinyurl.com/Lurch-VCCACHAT-Gallery
Justin - 1928 AB Canopy Express (1/2 ton truck) - tinyurl.com/Justin-Stovebolt-Gallery
Thanks Dean, perfectly clears it up....
Appreciate the helpful comments I have received.
I have made a bit of progress. Cleaned up and repaired some old wiring. Oil Change and lubed cylinders and lifters, generator, prepping for coolant water/air flush, drained old fuel and removed carburetor (ordered new brass bowl, o-ring,gasket...3 week delay on bowl...(current bowl has repaired with solder cracks and cobbled o-ring made of gasket material and of course lots of indications of leaks... Carb is soaking... Tranny and differential fluids next... I haven't figured out what weight oil to use yet...
I'm counting 5 posts, so...
pictures please! 🙂
For engine oil, my recommendation is... keep it light.
Your engine relies on flow, not pressure, and the ability of the rod dippers to splash lots of oil out of the troughs and break it up into a fine mist to lubricate everything.
So, nothing heavier than a 10W30, and I prefer and use nothing heavier than a 0W20.
And do NOT try to use non-detergent oil, no matter what some people will try to tell you.
Ole S Olson
Saskatoon, Sask, Canada
1946 DR 3/4 ton stake
1139 old site posts
Thanks for that tip and I do have 10W30 in the engine but unsure what to use in the tranny and differential...
yep will send some photos as soon as the not allowed symbol goes away 🙂
In my '28 truck, I use Mobil 600W (as recommended in the manuals) for the transmission, u-joint, and rear differential. Various vendors sell it in quarts.
A few years ago, I bought a 5 gallon bucket of it from a local oil distributor (Western States Oil) and that bucket is about 1/3 still there. ;-). At the time, I found that getting the bucket was cheaper (per quart) than buying the same amount in quart form.
For the engine, I also use 10-30W (any brand). This subject came up frequently on the old forum and the gurus there always recommended 10-30W.
Cheers, Dean
Dean "Rustoholic" Meltz
San Leandro, CA
3511 posts on vccachat.org
Lurch -1927 LM one ton truck - tinyurl.com/Lurch-VCCACHAT-Gallery
Justin - 1928 AB Canopy Express (1/2 ton truck) - tinyurl.com/Justin-Stovebolt-Gallery

