Notifications
Clear all

Outer door handle removal

 

(@karl-hochratner)
New Member Registered
Joined: 14 years ago
Posts: 1
Topic starter  

Hi everybody

I had to interrupt the restoration of my '32 four door for 5 years for several reasons. other projects, construction work, family... Now I am back and I hope for good. Back at the project and back in this forum which in the years back was always helpful to me. My first question is now this one: I want to take out the outer door handle of the rear right door because it is broken. Now I understand  that I have to hit it out with a punch from the inside. Trying a few hits did not bring any change. I suspect that I have to press down the handle to the "open" position to get it out. But before I do some experiments and apply too much force at the wrong point, I rather ask here what is the trick to get this handle out. Thanks for any hints. 



   
Quote
Tiny
 Tiny
(@tiny)
Hall Monitor Moderator
Joined: 21 years ago
Posts: 1443
 

I have no idea if this translates to a 32 but my 38 had a screw that you have to remove to remove the handle. That screw is accessed from the door edge. The Filling Station lists that screw for sale so it might apply. Open the door and look at the door edge where the handle goes through. You should see a small hole. Rotate the handle until you see the screw slot.


7046 old site posts
Save a life, adopt a senior shelter pet
There are many good people. If you can't find one, be one.
1938 Master Business Coupe-Sold, now living in New Jersey
1953 210 Sedan


   
ReplyQuote
Share: