Classifieds

I need a glove box button latch for a 1934 chevy Master , also the 4 door push down to lock when inside car trying to go back Original. Thanks

I need a original rear seat for a 1934 master no matter the shape .Thanks

1932 Chevrolet Confederate 4 door special for sale.  Currently under restoration and about 8o – 85% complete  All wood replaced with some original pieces used.  vehicle is complete except running board mats/ 95% of chrome redone.  Complete new Hampton Coach interior (still in the box) ready to be installed,  Many...

NORS distributor cap for 1933-52 Chevy motors. it has brass contacts.

set of generator brushes for all 1940-62 chevy generators .

Here is a set of 3 generator brushes  for 1925-36  Chevy generators

Here is a old delco package of starter brushes   these will fit 1925-54  Delco starters   4  brushes per starter   $11  per set.

Two Park Light Lenses for 1940 Chevrolet.  These are in the original boxes.  One is definitely NOS the other is new but may be a reproduction.  Both are new and never been on a car.  Are they worth $20 plus shipping?  Call me...

Rear Trunk Guard for 1940 Chevrolet.  This piece if fairly complete.  The release lever is broken.  Included is a newly re-chromed emblem, however the stud on the back has broken off--this stud is included, however.  I am asking $75 plus shipping but call me with your ideas.

Front Grill Guard for 1940 Chevrolet.  It is not complete but most of it is there.  The caps that go over the bumper guards that hold the ends in place are missing.  The brackets that attach to the underside of these caps are included.  An emblem and some bumper bolts...

1939 speedometer & gauges out of a master deluxe . All original and in very good condition with all gauges working . Price $ 90.00 and includes shipping in U.S.A. NEWER  PRICE   $60.00

Main bearing shells for 1933 206.8 CI engine.  These came out of a 70,000 mile engine and are in very good condition.  A guy could run them as is, but they are likely candidates for re-babbitting.  I am asking $50 plus shipping.

Ash tray and receiver for 1940 Chevrolet without a radio.  It is in excellent, restored condition.  The woodgrain is beautiful.  I'm asking $150 plus shipping but I do not know what it is worth.  If you are looking for a real nice one of these, please call me and I...

Here are 6  NOS  AC 104 com  sparkplugs  these are the 10 MM  plugs  used in 1941-48 trucks.    I have 2 set   $30 ea set

Three pushrods for a 1933 Chevrolet 206.8 engine.  None are bent.  There is a little pitting but overall they are very good and solid.  I'd like to get $50 plus shipping.

Distributor for a 1933 206.8 engine.  644 D   46771.  It is in very nice shape.  The shaft spins smooth on the bushings with no slop.  The vacuum advance and octane selector are missing.   I'd like to get $50 plus shipping.

Here are 4 NOS   rear spring tension plates  P/N 352461 .   These are for 1928-29  car and 1/2 tons  .

here are 2 front wheel felt seals  . 1 is Victor   and 1 is GM   .  GM P/N 3656536.    these fit 1941 54 cars , 1941-59 1/2 tons  and 53-62 Corvettes

2 Victor   front wheel felt seals  for 1925-40   cars  exc. 33-36  standard models  , also 25-40 1/2 tons.

100% RESTORED AND COMPLETELY REBUILT NUMBERS MATCHING 235 STOVEBOLT ENGINE AND 2-SPEED POWERGLIDE TRANSMISSION. ENGINE BAY INCLUDES NEW 6V ALTERNATOR, RE-CORED RADIATOR, WATER PUMP, NEW STARTER, BATTERY, COMPLETE FUEL SYSTEM INCLUDING NEW FUEL TANK. REAR GLASS, SIDE WINDOWS AND WINDSHIELD ARE NEW. ALL NEW WIRING THROUGHOUT ENTIRE CAR INCLUDES EVERY...

Herr are 2 sets of contact points  Delco No. 1855520 .  these fit 1927-32  and 33-34 standard models  and a lot of other vehicles.

CHEVROLET Gas Cap Locking, Chrome (Not Original) Inside Flange (28-52 Cars, 38-57 Trucks) This is a locking chrome gas cap with an inside flange. This is a replacement and not an original Chevrolet item. For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942...

Looking for a original 1939 Chevy steering wheel horn button or complete wheel. let me know what you have 562-665-7365

Seeking a pair of  1949 -50 Chevy up-rights for my rear tall bumper guard. Thanks, I only have PayPal or Bank cashiers check. Thanks, Greg

Here is a very good condition Chevrolet script   lens   920544 .   This is correct for 1937-38  cars.   NO cracks  or chipped edges.

2 NOS  2 bulb head light reflectors   for 1929-30 car and trucks  without cowl lights.     I have polished up these 80+ year old reflectors  to a much better shin then they where  but they are still not perfect   but probably brighter then originl ones  that are in your cars...

Hereare 2 NOS  singke bulb head light reflectors , these are for cars with cowl lights.    These 80+ year old reflectors  where tranished some  and i have polished them to a much brighter shin,   probably better  then original ones in your cars .    It is hard to get...

here are 2 NOS head light reflectors   that I have polished up    and made a lot brighter then they where  but still not perfect.        Probably brighter then original ones in your cars .      Ir is hard to get a good picture of these  , ...

Here are 2 NOS head light reflectors  for 34 master models .     These 80+ year old parts where tranished some  and I polished  them up and made them a lot brighter then they where.   They are still not perfect   but   probably brighter then orignal ones in your cars.   ...

Hello everyone, have a nos part for sale. 1950-53 Oldsmobile headlight bezel for sale, part number #5938928 $140.00 obo

Looking for some rear bumper ends or wing-tip. They must be descent( chrome no problem). Greg gmduque323@gmail.com thanks

Introducing Maxine. Here is a unique opportunity to acquire an original unrestored 1958 Chevrolet Biscayne. It has 36,900 original miles. Always garaged.  She's had four owners: the elderly original owner who drove it very little, a friend of my grandfather, my grandmother, and finally me. I became the caretaker in...

Wanted BLC -5 3/4 amber fog lights for my 1949 Chevy Fleetline. Thanks, Greg

Looking to buy a nice pair of '37/'38 chevrolet 8 slot wheels. Let me know if anyone has a pair available for sale. Thank you.

This is a  WORKING   1955-56  V-8 starter  ( stamped on case is 1107649 )   .  This is correct for  Corvette, truck and cars .

Price Reduced/ Upgraded to a 235 a engine (from a 1956 with very low miles - under 50,000 miles). All new 12 volt wiring. New rear Huck brakes. New Carter carburetor as well as many other new and replaced parts. Runs and drives very well. I also have the old...

I am searching for a crankshaft for 1933 Chevy 1/2 ton truck 207 engine. ESN:60D06-3954 MOTOR:T3697928 Casting # 836953

Here is a (old)  set of  Jim Rodman  1930 standard coupe left side door wood .  This was purchased 30+  years ago  and never got used.     This might also fit 29 coupe ???      Looks to all ash wood   and VERY well seasoned  !!!

A untouched box of 8    C 86   AC spark plugs  .  this is a modern plug for these old chevys

Hello have a nos part for sale. plate kit, instrument panel switch trim (gray) part number gm 15636850 $75.00 obo 1986-94 Chevy s10 1992-94 GMC jimmy 1986-91 GMC s15 1991-93 Sonoma 1991 GMC syclone 1992-93 GMC typhoon 1991-94 Oldsmobile bravado

Hello. have nos part for sale. Upper steering jacket bearing. Part #5660233 $150.00 obo 1949-54 passenger car. Except power steering. 1953-62 corvette 1947-55 pickup, commercial,utility  

Trunk handle off 1939 M.D. In very good condition . Price $50.00 with shipping included in U.S.A.

Here is a pair Of NOS head light assembly's   for a 1941 chevy car.

Here is  a original GM box with part No.  913672  on it, these are correct for 1931 cars  and 1932 trucks.   These are in perfect condition.

here are 2 pairs  of curb feelers .    both look like they where never used.  $20 for smaller pair ( about 9.5" long ) and $25  for the larger pair ( about 10.5" long )

NOS   collar and packing seal  for U-joint ball housing  ,  fits 1937-54   Cars  ( Except 1933-36  Standard models )   and fits  37-54 1/2 tons   . I have 2 of these .   $12 ea.

Hello. Have for sale. NOS part. $30.00 obo 1975-82 corvette strut rod bushing part number GM 3829519 thanks

Hello we have for sale. NOS part. 1966 Chevy bel Air LH rear quarter extension part number LH-454 1207-09. thanks

Hello everyone. have for sale. NOS part. RH front inner bumper bracket. Fitting 1965-67 Chevy corvair. Part number 3854106 $30.00 obo thanks

1931 2-door coach (sedan) for sale. This is a project vehicle with the original drivetrain.  Currently under restoration and includes many parts to finish. The model has spare tires for both left and right fender.  Includes new bumpers and all hardware, seats and interior need restoration, instruments and dashboard, asking...

I am looking for a body side molding for a 1966 Chevy Impala conv. drivers side. A full eight piece set is available but I only need the piece that goes from the rear edge of the door to the quarter wrap around piece in the rear. It measures  84...

Here is a 1931  19" wire wheel   that is painted aroura red     This wheel is in excellant condition and  never used since it was painted.

Her is a NOS AC glass fuel pump bowl  , fits all 1937-55  Vehicles with a /Orginal style AC pump.  bwbugay@aol.com

Here is a working 6 volt  generator   from a 1950  Chevy car, Delco no 1102710. Spins easily and no ears broken off.

Here is a original GM replacement king pin set P/N  601787.   in the GM box.    This is only for 1933-35  Std. model cars.

Wanted: 37-39 Bug Screens

3704831 (3704832 cast# ) machined and balanced  fits 54 Passenger and 1/2T   $200.00 plus shipping  Also have a new 10-1/2" clutch assy that was balanced with the flywheel for $75.00  Will sell separate or as package for $250.00 Will also include throw out bearing and pilot bushing along with alignment...

New 30x3 1/2 Firestone gum dipped tires. Believe they are for a 22” rim. Never mounted.  Was too small for my '24 Chevy Coupe

Looking for a maroon/red Original GM US gauge compass.

here is a  never used  clutch pilot bearing ( bronze bushing)   fits  from 1939- mid 1960's .    I have a few of them .

Here is a bunch of NOS  trans. mount bolt locks  P/N  372699,   these are for all 1933-53  1/2 ton trucks.   $8 ea.

Eastwood Body Solder Kit - Lead-based solder for better adhesion and longer durability than plastic fillers Kit items pictured - including 9 1/2 sticks of solder.

Here are 3 of the 4 moldings required  for a 1941 grill ,  all NOS parts .     very nice condition .

This is an Australian Utility, doors forward is American, rear of ute is Australian bodied. This vehicle  has been partly restored which included lots of panel work a respray, the seats, door trims and headliner have been replaced. I have purchased new window handles for it, it was rewired and...

here is a NOS  41 wiper control knob + shaft assembly .

here is a accessory onxoid  horn button for 1937 master model  ( this is the correct color )  .   It is in nice looking condition   there is a slight warp on one edge  you have to be close to see it.

Here is a never used  black horn button  2.5" dia.  that is correct for 37 Master Deluxe models .   This can be used on 38-9  models also just needs to be painted brown .   rubber is still pliable.

Here is a never used  rim and glass lens  replacement  part  for 1931-32  Chevy cars .

Here is assortment  of 1/2" bumper bolts with round  heads  covered with  SS  caps.    ;   1 - 1.5"     3 - 2"    5 - 1 3/16 "   long .      Never used .

1993 Camaro Fastback. 54,000. Miles. 5 Speed Stick Shift, 5th gear is overdrive. V6 fast enough, Designed to Run On Regular Unleaded Gas. Original Paint,  No Accidents, have car fax. Maintenance and repairs all up to date.  Too many cars, not enough storage.  Upgraded Pioneer CD FM BlueTooth. Other than...

Here is  a very nice condition extension trunk  for 1931-32  with mounting brackets and a repro  inside lable,  have the keys  and latches are good.   No rust outs  or dents .

Wanted, Original running board moldings for 1939

Here are 4 NOS  brass bushings P/N 361194 .    For 1923-29  cars and 1/2 tons  .   These press into the spring horns that are rivoted to the frame of car.

NOS GM   seat adjust handle screws  for 1929-32 cars , GM P/N 3654595.     These are 10-32 threads with a pillister head and a Clutch drive slot . 5- crome ones  $7      or  5- cad plated ones  $5  .  your choice !!!!

Wanted , 1932 5 Window coupe seat frame and mechanism complete, doesn't have to be new but at least good enough to make patterns from, would have to be dismantled and shipped to Australia. Alternatively templates and mechanism ( seat rails and adjuster etc. ) Please email me with price...

Looking for front and rear bumpers for 1937 Chevrolet Master De Luxe

Looking for a few items for my truck project. The pieces that wrap the wood on the door headers, both sides. IDK if some cars would potentially be the same? Also looking for the tag that goes under the vin tag that talks about carrying capacity (I think 28 was...

Nice 1929-1930 Twilite headlamp. Front trim ring dented in a few places - may be repairable. There is a headlight bulb and running light bulb. Glass is in great shape. The 3-pin plug is intact and included.

Stromberg South Bend URO-1 updraft carburetor for 4 cylinder engines. 1928 - 1936.  Was taken off of a running 1927 LM 1 ton truck several years ago.

Looking for a set (12) of solid lifters for a 1966 GMC 305E V6 NOS if possible.  Mellings has them but they are pricey and I don't trust where they are manufactured.  Thanks in advance!

WANTED 39 Under Dash Ashtray cedarez@aol.com

here is  a 1932  door handle ,   chrome is shinny but pimpley.

Here is a 1931 locking door handle with   key  that works it  ,some times it needs a wiggle.   Chrome is showing its age.

Here are 4  repro  head light bar oval head bolts for 1931  cars.    These are 25+ years old   and where never used.

1940 Chevrolet Technical Service Bulletins, Sales Manager's Service literature for 1940 Chevrolet Jim Handy Filmstrips/records, 1940 Truck Data Bulletins and Parts and Acceessories Merchandising Bulletins from 1942-1945. Almost everything here relates to 1940 Chevrolets with the exception of the Mechandising Bulletins. These are all copies of the originals. The stack...

 Original 1941-1948 Chevrolet Tool Kit. All of the tools in this kit are absolutely correct for 1941-1948 cars. The tools are original and reconditioned. The tool bag is a reproduction. A Tool Kit came with every new Chevrolet up until 1949. This tool kit  includs: a 9" adjustable wrench, a...

 Original 1937-1940 Chevrolet Tool Kit. All of the tools in this kit are absolutely correct for 1937-1940 cars. The tools are original and reconditioned. The tool bag is a reproduction. A Tool Kit came with every new Chevrolet up until 1949. This tool kit  includs: a 9" adjustable wrench, a...

City: SELIGMAN State: Arizona Price: 85.00 Delco Remy distributor # 1110008 8E-3 . Removed from a 39 m.d. Also fits 1937/38 Comes with working vacuum advance, new points , condenser , rotor . Ready to drop in and and go ,( In excellent condition.) $85.00 with FREE shipping in the...

WANTED 1939 Original Fender Skirts cedarez@aol.com

WANTED 1939-40 Original Back-Up Light cedarez@aol.com

WANTED Looking for fog light lenses for 1939 Chevy Master Deluxe. Part # 923706. Thank you in advance. cedarez@aol.com

These are Original VCCA Anniversary Meet Coins.  1976 Colorado Springs, CO for the 15th Anniversary.   1981 Downingtown, PA for the 20th Anniversary Meet, 1986 Santa Rosa, CA for the 25th Anniversary Meet.  2016 Lake Tahoe, NV for the 55th Anniversary Meet. They are $8 each plus shipping. They measure about...

4 Different Chevy Radios Top Radio is a 1966 - 67 Chevelle Radio. Second one down is a 1965-1966 Corvair Radio. Third one down is a Chevy II Nova Radio. Bottom one is a 1958 Chevrolet Radio - manual tune. The radios are all rust-free used radios. Condition is Used...

I would like to find a wiper transmission with good driver-quality chrome.  My car won't be a show car, but I want it to look good!  Thanks guys!

As you likely know, this was the first year for this model.  The original Corvairs were a flat six air cooled motor with 2 carburetors.  The Corsa was a sportier model that had been reengineered for 4 carbs (2 primary and 2 secondary) and a sportier dash and instrumentation.  This...

WANTED looking for 1934-1935 chev coupe std series seat rolling parts.......UUUUU ...the floor plate to lock seat in place.  thanks mike

Excellent shape, but project is cancelled

Here is a clutch disc;   1 for 33-34 Standard  $50 ,  NORS

Here is a pair of inner axle seals for 1925-31 cars and 1/2 tons.  also fit 26-28 Pontiac .  NORS parts

Here is a Good condition lower  windsheild frame center connector  , and one landau iron , with one center disc missing .   it is not bent or cracked.