Reproduction Parts for 1916-1964 Chevrolet Passenger Cars & 1918-1987 Chevrolet & GMC TrucksFilling StationSHOP ONLINE | ONLINE CATALOG | ABOUT US

Forums
Technical
Technical - Electri...
Accessory Junction ...
 
Notifications
Clear all

Accessory Junction Block Install

 
    Last Post
 

 Jeffrey Salz
(@jeffrey-salz)
Trusted Member Registered
Joined: 7 years ago
Posts: 30
Topic starter March 25, 2025 9:49 am  

I just purchased an NOS Wiring Junction Block (986442) for my 51. The first step in the instructions is to "Remove inspection cover on dash". Is that the plate that the voltage regulator is mounted to? If so, does the VR need to be removed first? That is not specified in the instructions. Thanks, as always for your help.

Jeff 


   
Quote
 Dennis Christianson
(@dennis-christianson)
Active Member Registered
Joined: 20 years ago
Posts: 18
March 25, 2025 11:49 am  

Yes that is correct, and I would remove the regulator first. 


   
ReplyQuote
 Jeffrey Salz
(@jeffrey-salz)
Trusted Member Registered
Joined: 7 years ago
Posts: 30
Topic starter March 25, 2025 3:27 pm  

@dennis-christianson Dennis,

Thanks for confirming that for me. I agree that removal of the VR would make everything easier and without the fear of breaking a wire.

Jeff


   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  
Share: