The Filling Station has a rebuild service. Their ad is at the top of the page.

Hi Derek

It seems the bushings and packings for all water pumps were the same from 1929 through 1936, but the shaft and impeller were different for the '33 and '34 Standard.

So...

If your shaft and impeller are usable, a bushing and packing kit for any 1929-36 pump should work.

Hope that helps.

Hi Stovbit,

Thanks for the information on the bushings and packing.

Unfortunately my shaft and impeller are worn out and I need those bits also.

Thanks again for your help. 

@derek-page 

After more searching...

It looks like rebuilding your shaft and impeller is the only alternative you have.

Tiny's suggestion is the easiest and probably best way to go.

Otherwise, maybe you can find a local shop that will remove the shaft from the impeller and press in a new one.

Then, as stated, bushings and packings are available to finish the job.

Hope you get er back on the road soon!

PS

Try Marx Parts here:

https://marxparts.com/

Other members have had excellent results there, some of them with your exact problem (the unique '33-'34 Standard water pump).

Hi Everyone,

Thanks for your input into my problem, much appreciated.

It looks like these kits are not available, so I will try what has been suggested and have a go at repairing my pump.

Hello Dereck, there is a fellow in our region who may have most of a kit you could buy. It would be the shaft and impeller assembly he would have. Can you get some fairly accurate measurements in inches?

Hi Arthur,

Thanks for the reply to my post, I have just purchased a repair kit and am in the process of repairing my water pump.

Hence, I am all sorted out now.