New
Here is a set of 6 NOS 1933 intake valves these are also for 1934 Standard model engines .
New
Prefer an ALL ORIGINAL RESTORED 396 or 427 Th400 A/C Car. 2 dr hardtop Plain Impala or SS or SS427 but NO CONVERTIBLES or Project Cars. Tahoe Tourquoise color ONLY, NOT INTERESTED IN ANY OTHER COLOR . Any leads are appreciated
New
Here is a never used shifter knob . it has 3/8" fine threads inside. will fit 1927-36 cars and trucks also 1037-59 trucks with 4 speed trans.
New
Wanted 1st Gen S10 Must be Fleetside Body Must be 2wheel drive Must be in good to excellent condition
New
1988 Chevy Celebrity Station Wagon. My in-laws purchased this car brand new; it was always stored inside. The 2,8 V-6 engine has only 47,000 miles on it. The A/C compressor was replaced, and the system was charged with 134A last year. New tires, brakes, water pump and much more. I...
NewPopular
Wanted, desperately need a pinion gear for the rear axle assy. of my Liberty Garage 1924 Chevrolet flat bed truck. It's a spiral 7 tooth gear. Used on 1923 to 1925 Chevrolet trucks. Possibly other years but doubtful. (I'm not an expert.) I'll purchase a complete rear end if necessary...
NewPopular
This is a GM ground cable 9.5" c/c long. P/N 1851645 . Lists in Chevy parts book for 1929-36 Exc. FC FB, 1937-39 Exc. COE . It is stamped GM
New
Here are 2 original equipment mirrors that are in nice condition . They are different colors and I have labled what I think they are from, but you decide what they are. They may be from 51-2 ??? $24 ea. The chrome one I think is for...
New
Here are 2 oringinal equipment 1953-57 inside mirrors . One is chrome and the other is silver paint. The chrome one ( $28 ) was used on the higher priced models and the silver painted one on the lesser models . The silver paint has some...
New
Here is a inside mirror from a 58 model but not a Impala . This is about 7.5" wide . Impalas used a wider mirror. The chome hs some scratches on it but still a decent peice.
New
I need a glove box button latch for a 1934 chevy Master , also the 4 door push down to lock when inside car trying to go back Original. Thanks
I need a original rear seat for a 1934 master no matter the shape .Thanks
Popular
1932 Chevrolet Confederate 4 door special for sale. Currently under restoration and about 8o – 85% complete All wood replaced with some original pieces used. vehicle is complete except running board mats/ 95% of chrome redone. Complete new Hampton Coach interior (still in the box) ready to be installed, Many...
NORS distributor cap for 1933-52 Chevy motors. it has brass contacts.
set of generator brushes for all 1940-62 chevy generators .
Here is a set of 3 generator brushes for 1925-36 Chevy generators
Here is a old delco package of starter brushes these will fit 1925-54 Delco starters 4 brushes per starter $11 per set.
Two Park Light Lenses for 1940 Chevrolet. These are in the original boxes. One is definitely NOS the other is new but may be a reproduction. Both are new and never been on a car. Are they worth $20 plus shipping? Call me...
Rear Trunk Guard for 1940 Chevrolet. This piece if fairly complete. The release lever is broken. Included is a newly re-chromed emblem, however the stud on the back has broken off--this stud is included, however. I am asking $75 plus shipping but call me with your ideas.
Front Grill Guard for 1940 Chevrolet. It is not complete but most of it is there. The caps that go over the bumper guards that hold the ends in place are missing. The brackets that attach to the underside of these caps are included. An emblem and some bumper bolts...
Popular
1939 speedometer & gauges out of a master deluxe . All original and in very good condition with all gauges working . Price $ 90.00 and includes shipping in U.S.A. NEWER PRICE $60.00
Main bearing shells for 1933 206.8 CI engine. These came out of a 70,000 mile engine and are in very good condition. A guy could run them as is, but they are likely candidates for re-babbitting. I am asking $50 plus shipping.
Ash tray and receiver for 1940 Chevrolet without a radio. It is in excellent, restored condition. The woodgrain is beautiful. I'm asking $150 plus shipping but I do not know what it is worth. If you are looking for a real nice one of these, please call me and I...
Here are 6 NOS AC 104 com sparkplugs these are the 10 MM plugs used in 1941-48 trucks. I have 2 set $30 ea set
Three pushrods for a 1933 Chevrolet 206.8 engine. None are bent. There is a little pitting but overall they are very good and solid. I'd like to get $50 plus shipping.
Distributor for a 1933 206.8 engine. 644 D 46771. It is in very nice shape. The shaft spins smooth on the bushings with no slop. The vacuum advance and octane selector are missing. I'd like to get $50 plus shipping.
Here are 4 NOS rear spring tension plates P/N 352461 . These are for 1928-29 car and 1/2 tons .
here are 2 front wheel felt seals . 1 is Victor and 1 is GM . GM P/N 3656536. these fit 1941 54 cars , 1941-59 1/2 tons and 53-62 Corvettes
2 Victor front wheel felt seals for 1925-40 cars exc. 33-36 standard models , also 25-40 1/2 tons.
Popular
100% RESTORED AND COMPLETELY REBUILT NUMBERS MATCHING 235 STOVEBOLT ENGINE AND 2-SPEED POWERGLIDE TRANSMISSION. ENGINE BAY INCLUDES NEW 6V ALTERNATOR, RE-CORED RADIATOR, WATER PUMP, NEW STARTER, BATTERY, COMPLETE FUEL SYSTEM INCLUDING NEW FUEL TANK. REAR GLASS, SIDE WINDOWS AND WINDSHIELD ARE NEW. ALL NEW WIRING THROUGHOUT ENTIRE CAR INCLUDES EVERY...
Herr are 2 sets of contact points Delco No. 1855520 . these fit 1927-32 and 33-34 standard models and a lot of other vehicles.
Popular
CHEVROLET Gas Cap Locking, Chrome (Not Original) Inside Flange (28-52 Cars, 38-57 Trucks) This is a locking chrome gas cap with an inside flange. This is a replacement and not an original Chevrolet item. For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942...
Popular
Looking for a original 1939 Chevy steering wheel horn button or complete wheel. let me know what you have 562-665-7365
Seeking a pair of 1949 -50 Chevy up-rights for my rear tall bumper guard. Thanks, I only have PayPal or Bank cashiers check. Thanks, Greg
Here is a very good condition Chevrolet script lens 920544 . This is correct for 1937-38 cars. NO cracks or chipped edges.
2 NOS 2 bulb head light reflectors for 1929-30 car and trucks without cowl lights. I have polished up these 80+ year old reflectors to a much better shin then they where but they are still not perfect but probably brighter then originl ones that are in your cars...
Hereare 2 NOS singke bulb head light reflectors , these are for cars with cowl lights. These 80+ year old reflectors where tranished some and i have polished them to a much brighter shin, probably better then original ones in your cars . It is hard to get...
here are 2 NOS head light reflectors that I have polished up and made a lot brighter then they where but still not perfect. Probably brighter then original ones in your cars . Ir is hard to get a good picture of these , ...
Here are 2 NOS head light reflectors for 34 master models . These 80+ year old parts where tranished some and I polished them up and made them a lot brighter then they where. They are still not perfect but probably brighter then orignal ones in your cars. ...
Hello everyone, have a nos part for sale. 1950-53 Oldsmobile headlight bezel for sale, part number #5938928 $140.00 obo
Looking for some rear bumper ends or wing-tip. They must be descent( chrome no problem). Greg gmduque323@gmail.com thanks
Popular
Introducing Maxine. Here is a unique opportunity to acquire an original unrestored 1958 Chevrolet Biscayne. It has 36,900 original miles. Always garaged. She's had four owners: the elderly original owner who drove it very little, a friend of my grandfather, my grandmother, and finally me. I became the caretaker in...
Wanted BLC -5 3/4 amber fog lights for my 1949 Chevy Fleetline. Thanks, Greg
Looking to buy a nice pair of '37/'38 chevrolet 8 slot wheels. Let me know if anyone has a pair available for sale. Thank you.
This is a WORKING 1955-56 V-8 starter ( stamped on case is 1107649 ) . This is correct for Corvette, truck and cars .
Popular
Price Reduced/ Upgraded to a 235 a engine (from a 1956 with very low miles - under 50,000 miles). All new 12 volt wiring. New rear Huck brakes. New Carter carburetor as well as many other new and replaced parts. Runs and drives very well. I also have the old...
I am searching for a crankshaft for 1933 Chevy 1/2 ton truck 207 engine. ESN:60D06-3954 MOTOR:T3697928 Casting # 836953
Here is a (old) set of Jim Rodman 1930 standard coupe left side door wood . This was purchased 30+ years ago and never got used. This might also fit 29 coupe ??? Looks to all ash wood and VERY well seasoned !!!
A untouched box of 8 C 86 AC spark plugs . this is a modern plug for these old chevys
Hello have a nos part for sale. plate kit, instrument panel switch trim (gray) part number gm 15636850 $75.00 obo 1986-94 Chevy s10 1992-94 GMC jimmy 1986-91 GMC s15 1991-93 Sonoma 1991 GMC syclone 1992-93 GMC typhoon 1991-94 Oldsmobile bravado
Hello. have nos part for sale. Upper steering jacket bearing. Part #5660233 $150.00 obo 1949-54 passenger car. Except power steering. 1953-62 corvette 1947-55 pickup, commercial,utility
Popular
Trunk handle off 1939 M.D. In very good condition . Price $50.00 with shipping included in U.S.A.
Popular
Here is a pair Of NOS head light assembly's for a 1941 chevy car.
Popular
Here is a original GM box with part No. 913672 on it, these are correct for 1931 cars and 1932 trucks. These are in perfect condition.
here are 2 pairs of curb feelers . both look like they where never used. $20 for smaller pair ( about 9.5" long ) and $25 for the larger pair ( about 10.5" long )
NOS collar and packing seal for U-joint ball housing , fits 1937-54 Cars ( Except 1933-36 Standard models ) and fits 37-54 1/2 tons . I have 2 of these . $12 ea.
Hello. Have for sale. NOS part. $30.00 obo 1975-82 corvette strut rod bushing part number GM 3829519 thanks
Hello we have for sale. NOS part. 1966 Chevy bel Air LH rear quarter extension part number LH-454 1207-09. thanks
Hello everyone. have for sale. NOS part. RH front inner bumper bracket. Fitting 1965-67 Chevy corvair. Part number 3854106 $30.00 obo thanks
Popular
1931 2-door coach (sedan) for sale. This is a project vehicle with the original drivetrain. Currently under restoration and includes many parts to finish. The model has spare tires for both left and right fender. Includes new bumpers and all hardware, seats and interior need restoration, instruments and dashboard, asking...
I am looking for a body side molding for a 1966 Chevy Impala conv. drivers side. A full eight piece set is available but I only need the piece that goes from the rear edge of the door to the quarter wrap around piece in the rear. It measures 84...
Here is a 1931 19" wire wheel that is painted aroura red This wheel is in excellant condition and never used since it was painted.
Popular
Her is a NOS AC glass fuel pump bowl , fits all 1937-55 Vehicles with a /Orginal style AC pump. bwbugay@aol.com
Popular
Here is a working 6 volt generator from a 1950 Chevy car, Delco no 1102710. Spins easily and no ears broken off.
Here is a original GM replacement king pin set P/N 601787. in the GM box. This is only for 1933-35 Std. model cars.
3704831 (3704832 cast# ) machined and balanced fits 54 Passenger and 1/2T $200.00 plus shipping Also have a new 10-1/2" clutch assy that was balanced with the flywheel for $75.00 Will sell separate or as package for $250.00 Will also include throw out bearing and pilot bushing along with alignment...
New 30x3 1/2 Firestone gum dipped tires. Believe they are for a 22” rim. Never mounted. Was too small for my '24 Chevy Coupe
here is a never used clutch pilot bearing ( bronze bushing) fits from 1939- mid 1960's . I have a few of them .
Here is a bunch of NOS trans. mount bolt locks P/N 372699, these are for all 1933-53 1/2 ton trucks. $8 ea.
Eastwood Body Solder Kit - Lead-based solder for better adhesion and longer durability than plastic fillers Kit items pictured - including 9 1/2 sticks of solder.
Popular
Here are 3 of the 4 moldings required for a 1941 grill , all NOS parts . very nice condition .
Popular
This is an Australian Utility, doors forward is American, rear of ute is Australian bodied. This vehicle has been partly restored which included lots of panel work a respray, the seats, door trims and headliner have been replaced. I have purchased new window handles for it, it was rewired and...
here is a accessory onxoid horn button for 1937 master model ( this is the correct color ) . It is in nice looking condition there is a slight warp on one edge you have to be close to see it.
Popular
Here is a never used black horn button 2.5" dia. that is correct for 37 Master Deluxe models . This can be used on 38-9 models also just needs to be painted brown . rubber is still pliable.
Here is assortment of 1/2" bumper bolts with round heads covered with SS caps. ; 1 - 1.5" 3 - 2" 5 - 1 3/16 " long . Never used .
Here is a never used rim and glass lens replacement part for 1931-32 Chevy cars .
Popular
1993 Camaro Fastback. 54,000. Miles. 5 Speed Stick Shift, 5th gear is overdrive. V6 fast enough, Designed to Run On Regular Unleaded Gas. Original Paint, No Accidents, have car fax. Maintenance and repairs all up to date. Too many cars, not enough storage. Upgraded Pioneer CD FM BlueTooth. Other than...
Popular
Here is a very nice condition extension trunk for 1931-32 with mounting brackets and a repro inside lable, have the keys and latches are good. No rust outs or dents .
Popular
Wanted, Original running board moldings for 1939
Here are 4 NOS brass bushings P/N 361194 . For 1923-29 cars and 1/2 tons . These press into the spring horns that are rivoted to the frame of car.
NOS GM seat adjust handle screws for 1929-32 cars , GM P/N 3654595. These are 10-32 threads with a pillister head and a Clutch drive slot . 5- crome ones $7 or 5- cad plated ones $5 . your choice !!!!
Wanted , 1932 5 Window coupe seat frame and mechanism complete, doesn't have to be new but at least good enough to make patterns from, would have to be dismantled and shipped to Australia. Alternatively templates and mechanism ( seat rails and adjuster etc. ) Please email me with price...
Looking for front and rear bumpers for 1937 Chevrolet Master De Luxe
Looking for a few items for my truck project. The pieces that wrap the wood on the door headers, both sides. IDK if some cars would potentially be the same? Also looking for the tag that goes under the vin tag that talks about carrying capacity (I think 28 was...
Nice 1929-1930 Twilite headlamp. Front trim ring dented in a few places - may be repairable. There is a headlight bulb and running light bulb. Glass is in great shape. The 3-pin plug is intact and included.
Popular
Stromberg South Bend URO-1 updraft carburetor for 4 cylinder engines. 1928 - 1936. Was taken off of a running 1927 LM 1 ton truck several years ago.
Looking for a set (12) of solid lifters for a 1966 GMC 305E V6 NOS if possible. Mellings has them but they are pricey and I don't trust where they are manufactured. Thanks in advance!
Here is a 1931 locking door handle with key that works it ,some times it needs a wiggle. Chrome is showing its age.
Here are 4 repro head light bar oval head bolts for 1931 cars. These are 25+ years old and where never used.
1940 Chevrolet Technical Service Bulletins, Sales Manager's Service literature for 1940 Chevrolet Jim Handy Filmstrips/records, 1940 Truck Data Bulletins and Parts and Acceessories Merchandising Bulletins from 1942-1945. Almost everything here relates to 1940 Chevrolets with the exception of the Mechandising Bulletins. These are all copies of the originals. The stack...
Original 1941-1948 Chevrolet Tool Kit. All of the tools in this kit are absolutely correct for 1941-1948 cars. The tools are original and reconditioned. The tool bag is a reproduction. A Tool Kit came with every new Chevrolet up until 1949. This tool kit includs: a 9" adjustable wrench, a...
Original 1937-1940 Chevrolet Tool Kit. All of the tools in this kit are absolutely correct for 1937-1940 cars. The tools are original and reconditioned. The tool bag is a reproduction. A Tool Kit came with every new Chevrolet up until 1949. This tool kit includs: a 9" adjustable wrench, a...
Popular
City: SELIGMAN State: Arizona Price: 85.00 Delco Remy distributor # 1110008 8E-3 . Removed from a 39 m.d. Also fits 1937/38 Comes with working vacuum advance, new points , condenser , rotor . Ready to drop in and and go ,( In excellent condition.) $85.00 with FREE shipping in the...
Popular
WANTED 1939 Original Fender Skirts cedarez@aol.com