1948 Chevy Fleetmas...
 
Notifications
Clear all

1948 Chevy Fleetmaster Tailgate Bolt

 

(@buckaroo01-2-2-2-2)
Eminent Member Registered
Joined: 6 months ago
Posts: 19
Topic starter  

 

IMG 0377

The upper left side tailgate bolt on my !948 Chevy Fleetmaster Woodie had broken off. Does anyone know where I can get another one? The inside of the bolt is flat with a hex head and the outside has a truss head. Any help is appreciated.

This topic was modified 5 months ago by John Buck

   
Quote
Minetto
(@michael-falise)
Trusted Member Registered
Joined: 46 years ago
Posts: 50
 

Originally the outside was a chrome plated capped nut with a chrome plated phillips head machine screw from the inside. Finding capped nuts is like finding hen’s teeth. If yours have been changed to a typical hex nut and arrangement, Iwould polish the head on a stainless carriage bolt and use a stainless nut and washer on the inside. 

IMG 5232
IMG 5231
IMG 5233
IMG 5234

   
ReplyQuote
(@buckaroo01-2-2-2-2)
Eminent Member Registered
Joined: 6 months ago
Posts: 19
Topic starter  

I found a  binding barrel on Zoro.com. Pictures of the binding barrel and specs attached. i had a machine shop drill the barrel out more, then I cut the barrel and screw to fit the length needed. Here’s the completed project.

IMG 0389
IMG 1977
IMG 1976
IMG 0388

 


   
ReplyQuote
Minetto
(@michael-falise)
Trusted Member Registered
Joined: 46 years ago
Posts: 50
 

Nice job John, looks great!


   
TonyW reacted
ReplyQuote
Share: