I am putting in a new Cowl vent seal in from Steele. This might be a stupid question but which side faces down into the Cowl track? The smooth section or the U shaped section? The U shpaed section fits the cowl shape so I was wondering if the metal cowl closes into that? If I put it in that way, it doesn't lay correctly. Any help would be greatly appreciated. Thanks.
Assuming the 40 is the same as the 38 (I have a 38) the seal goes on the cowl side. The door closes onto the seal. You can see the seal in place on my 38 in the photo below.
7046 old site posts
Save a life, adopt a senior shelter pet
There are many good people. If you can't find one, be one.
1938 Master Business Coupe
1953 210 Sedan