Reproduction Parts for 1916-1964 Chevrolet Passenger Cars & 1918-1987 Chevrolet & GMC Trucks
SHOP ONLINE | ONLINE CATALOG | ABOUT US
The water pump grease cup. Should there be a hole where it goes into the water pump so you can push a small wire through it or is there some kind of baffle in there? I would think there should be a hole in there that you could push a small wire through so the grease can go in there
Yes, there should be a hole at the bottom of the grease cup. It looks like yours is sealed off with dried grease crud.
Dean
Dean "Rustoholic" Meltz
San Leandro, CA
3511 posts on vccachat.org
1927 LM one ton truck - tinyurl.com/Lurch-VCCACHAT-Gallery
1928 AB Canopy Express (1/2 ton truck) - tinyurl.com/Justin-Stovebolt-Gallery
@rustoholic Thanks, I thought I should be able to push it out with a small wire but maybe I am going to have to drill it out
There should be a small ball in the passage so the grease is not pushed back toward the cup. The ball prevents pushing a wire through the passage. Trying to drill out the passage will likely destroy the part.
How sweet the roar of a Chevy four
Participant on Chatter since 11/22/2001
19758 posts on the former Chatter site
@chip Thanks. I was about ready to take the drill to it. I guess just put some grease in the cup and see if it pushes through?
We are both glad you saw the post before you got frustrated with drilling it. I made the mistake many years ago.
How sweet the roar of a Chevy four
Participant on Chatter since 11/22/2001
19758 posts on the former Chatter site
Latest Post: Leaking W-1 Carb Our newest member: Jasonknivy Recent Posts Unread Posts
