Rebuilt Delco-Remy Model 1112403 distributor and slightly used parts. Before rebuild, gear had side to side movement. Pin replaced with roll pin, which eliminated side to side movement of the gear. Parts used less than 200 miles have been installed in the distributor, including: points (don’t recall brand); capacitor (GM#12338664, ACD#D203); rotor (Delco-Remy #1924245, #D405); cap (NAPA RR162); ballast resistor (Standard RU10); coil (Select 1003); ’55 Chevy 235 coil clamp w/bracket for noise suppression cap. and mounting screws; resistance wire from coil to distributor; vacuum line for vacuum advance; and round nut wrench for round nut in the black plastic bushings in the side of the distributor. There are also the following spare parts: spare rotor (brand unknown); spare cap (brand unknown); spare ballast resistor (brand unknown).