Parts Wanted

Wiper arm attaching "driver". The part that the wiper arm slips over when installing. It is 3/8" high-1/2" diameter and has a 1/4" center hole . Splined on the outside and thru the center hole. VCCA members only. My contact info is available on the VCCA database or you can...

  I need some fulton parts.. clamps and center trim... a few of each.

  I need some fulton parts.. clamps and center trim... a few of each.

WANTED looking for 1934-1935 chev coupe std series seat rolling parts.......UUUUU ...the floor plate to lock seat in place.  thanks mike

Wanted a 1947-48 trunk handle. Please no scammers. I will report any abusers to VCCA. We don’t have time for dishonest people on our site. oldie62-Greg

Amber fog light lenses #923706 . Let me know if you have any. Thanks

In need of used cam shaft any condition (except rusted or broken) for 1925, 26 or 27 .  This is for a project car.  Thanks

Looking for a Carter YF2100s carburetor in good usable or rebuildable shape. Thanks!

I am in need of a 1940 grill support in decent condition. Since I have heard the part called by different names, I am attaching a photo of an example. Although the 1939 and 1940 grills are similar, the grill supports are NOT the same. Nick Gurin VCCA# 60281

Wanted, desperately need a pinion gear for the rear axle assy. of my Liberty Garage 1924 Chevrolet flat bed truck. It's a spiral 7 tooth gear. Used on 1923 to 1925 Chevrolet trucks. Possibly other years but doubtful. (I'm not an expert.) I'll purchase a complete rear end if necessary...

Looking for an accessory back up light switch for a 1951 Chevrolet with standard transmission. GM part number is 1997911. A good used one or NOS is OK.

Looking for both L&R original 1939 Chevy NOS running boards and rubber mats.

Looking for 49-54 convertible clutch adjusting rod. Chevrolet part number 3688194. Group number 0.787. Description; Fork offset (dev. length 7 1/8). This is the adjusting link that attaches to the clutch fork, and has threads on one end, with provisions for return springs on the other. Chevrolet parts manuals show...

Wanted, desperately need a pinion gear for the rear axle assy. of my Liberty Garage 1924 Chevrolet flat bed truck. It's a spiral 7 tooth gear. Used on 1923 to 1925 Chevrolet trucks. Possibly other years but doubtful. (I'm not an expert.) I'll purchase a complete rear end if necessary...

I need a glove box button latch for a 1934 chevy Master , also the 4 door push down to lock when inside car trying to go back Original. Thanks

I need a original rear seat for a 1934 master no matter the shape .Thanks

Looking for a original 1939 Chevy steering wheel horn button or complete wheel. let me know what you have 562-665-7365

Seeking a pair of  1949 -50 Chevy up-rights for my rear tall bumper guard. Thanks, I only have PayPal or Bank cashiers check. Thanks, Greg

Looking for some rear bumper ends or wing-tip. They must be descent( chrome no problem). Greg gmduque323@gmail.com thanks

Wanted 12Volt-BLC -5 3/4 amber fog lights for my 1949 Chevy Fleetline. Thanks, Greg

Looking to buy a nice pair of '37/'38 chevrolet 8 slot wheels. Let me know if anyone has a pair available for sale. Thank you.

I am searching for a crankshaft for 1933 Chevy 1/2 ton truck 207 engine. ESN:60D06-3954 MOTOR:T3697928 Casting # 836953

I am looking for a body side molding for a 1966 Chevy Impala conv. drivers side. A full eight piece set is available but I only need the piece that goes from the rear edge of the door to the quarter wrap around piece in the rear. It measures  84...

Wanted: 37-39 Bug Screens

Looking for a maroon/red Original GM US gauge compass.

Wanted, Original running board moldings for 1939

Wanted , 1932 5 Window coupe seat frame and mechanism complete, doesn't have to be new but at least good enough to make patterns from, would have to be dismantled and shipped to Australia. Alternatively templates and mechanism ( seat rails and adjuster etc. ) Please email me with price...

Looking for front and rear bumpers for 1937 Chevrolet Master De Luxe

Looking for a few items for my truck project. The pieces that wrap the wood on the door headers, both sides. IDK if some cars would potentially be the same? Also looking for the tag that goes under the vin tag that talks about carrying capacity (I think 28 was...

Looking for a set (12) of solid lifters for a 1966 GMC 305E V6 NOS if possible.  Mellings has them but they are pricey and I don't trust where they are manufactured.  Thanks in advance!

WANTED 39 Under Dash Ashtray cedarez@aol.com

WANTED 1939 Original Fender Skirts cedarez@aol.com

WANTED 1939-40 Original Back-Up Light cedarez@aol.com

WANTED Looking for fog light lenses for 1939 Chevy Master Deluxe. Part # 923706. Thank you in advance. cedarez@aol.com

Looking for a set of NOS or used 1961 / 1962 full size Chevrolet Station Wagon Vent Shades. Also looking for part #985591 Station Wagon and 4 door rear door warning light NOS, Used, or incomplete unit. Please Advise price and shipping to 01550.

Please delete. Found these already. Thanks, Greg

WANTED 1939 Washer Bottle Wanted cedarez@aol.com