Notifications
Clear all

New to me 48 Fleetline aero won't shift

 

Michael Alvarez
(@michael-alvarez)
Estimable Member Registered
Joined: 10 years ago
Posts: 67
Topic starter  

Hi Gents,

I'm usually chatting about my 38, but I have added a 48 Fleetline to my family. 

When I tested and loaded Fleetline on trailer, she shifted easily but after 100 miles on the trailer she is very difficult to shift. Something happened during transport. 

-Any suggestions where I might start. 

 -I can't tell if I'm in gear or not and she jumps out of gear if I dont hold the shift lever in place. 

 -Again, she shifted easily on test drive and when loaded on trailer. 

Thank you in advance 

Michael

38 Master Sedan

48 Fleetline Aero



   
Quote
(@dennis-christianson)
Trusted Member Registered
Joined: 21 years ago
Posts: 79
 

If the vacuum shift is still there then it sounds like the trailer ride may have caused a the vacuum hose to come off. The are almost impossible to shift when the cylinder has no vacuum to it.



   
ReplyQuote
Michael Alvarez
(@michael-alvarez)
Estimable Member Registered
Joined: 10 years ago
Posts: 67
Topic starter  

thank you,

I suspected that too, now I have to become familiar with the vacuum system as that is new to me. To make things a bit more complicated, the car has adjustable height suspension too and the front passenger side dropped to the boards of the trailer while the driver side maintained adjusted height. hopefully the linkage didn't get bent. 



   
ReplyQuote
Michael Alvarez
(@michael-alvarez)
Estimable Member Registered
Joined: 10 years ago
Posts: 67
Topic starter  

 

Able to crawl under Fleetline again and now know what google AI is talking about. Google ai suggests I secure he steering whee, place a floor jack below trans and unbolt vacuum arm from trans shaft with the exception of freeing the bound up trans from the vacuum canister that is may go back to its natural shifting mode and I can manually place in neutral and secure vacuum canister arm to trans.

38&48

my 48 and 38

fleetline on jack

48 on jack and jack stands

manifold vacuum line

blue capped outlet has its open line going to the vacuum canister

vacuum canister

piston going into vacuum canister with linkage to trans closest in view

trans shaft to vacuum canister

other view of trans shaft connected to vacuum canister via linkage 



   
ReplyQuote
Share: