Don't be shy in sharing your restoration problems with us.....and welcome from cold Wisconsin.

Hi,

Another new person checking in. I have a 47 Fleetline Aerosedan that is in pretty good condition. My dad has a 47 Fleetmaster convertible that is slowly being restored. I appreciate all the help and information that this site provides.

Quick question - I joined VCCA in December and received my first edition of G&D and VCCA badge but I don't know my member number. Is there someone I can contact about receiving my member number?

Thanks again for all the help you provide.

Perol

Look at the address lable on the material that was sent to you.
The number may be there. On my lable my number is just above my name -followed by my membership experation date.
You could also contact the membership secretary. Her name, address and phone number is on the membership services page of the G&D (page2).

Perol, your member number is 6685 according to your profile. Click on your profile and your member number is on it. It is different then your membership number that is on your card. I hope this helps...Oscar

6685 is the number assigned to you by the Chevy Chatter II. Your VCCA number should be noted on your G&D mailing label. Your VCCA number will be 44---, a 5 digit number. You should also be listed in the WELCOME ABOARD section of the G&D and your number will be listed there.

Thanks Ray...Oscar

Thank you for the welcome. I am new, so I'm not sure how all this works. So maybe I will get a reply to help me along. I am happy so far with the site. I also welcome any advice I could get at this point. thank you

I am looking for a rear seat for my 31 sedan. also trying to find out where the vin numbers should be put on the car.

thanks gary

Hi Gary and welcome to Chevy Chatter II!

The car serial number is located under the floor mat on the passenger side wood main sill just in front of the front seat facing the door.

For your parts wanted, you can post that in the "Parts Wanted" forum of Chevy Chatter II.

hi . i am an old member , but new at this chat thing . can anyone tell me how to get ahold of the membership secretary , either by phone or email to discuss a possable problem ? thanks hairball48625

Hairball,

The National Membership Secretary is Shirley Whitesell. You can find her address and phone number listed in your latest G & D.

If your concern is a local issue, you may call me at 248-363-4437. I'm the current Lower Michigan Region Director.

Hi Bill;

I`m a new guy. My problem is "YOUR STATUS' says I am loged in but I can`t see the members car pictures on the left, so where do I use the user ID number on page 7 of the GD?
Thanks for helping a computer challanged guy.

Jerry Oliver

Unfortunately that user id and password does not yet get you access in this site. If you post your VCCA member number in your profile [click on "My Stuff" on the action line and then "Profile" to get to the "My VCCA Number" box, then Enter your number there] it will make looking up your status easier. I will not go into details but once your current VCCA membership is verified then your permission will be manually changed and you will be able to see the photos. Hopefully in the near term future this step will not be necessary.

Hey Y'all ,
New to the list and I Am going to be picking y'alls brains for the next few years !!! I just bought a 1935 Chevrolet Master Deluxe Coupe (or so I'vve been told) heres the Numbers of the data tag on the engine cowl can you guys help me cypher it please ??

Style 35-1017
Body Number T 2163
Trim Number 47
Paint Number 185

After reading the archives I just went outside with i brass brush and uncovered the tag on the passenger floor it reads :

2EA0834124

Any Help would be most humbly appreciated,Thanks in advance

_________________________
Hill Billy 35

I need top parts and chrome parts for 1940 Chevy Convert, on engine or running gear is needed,

also have lots of same year parts for sale

I am a new member, with #45499 and I do not understand the verification process. How do I get verified?
Thanks, Jerry

Either Billy Boy Barker or Chippy Dippy will see your posting and then one of them will verify your membership.

You should be able to participate in the Members Only section of ChatII. Will need to use the user name and password in the G&D magazine for access on the vcca.org site.

why am I denied access to hauling and towing I am a VCCA member (35909)and have created a ID and Pass woed for the chat room?

Because you have not been verified by the site adminstrator or his helper. You will no doubt be verified you after one of them reads your posting.

You should also post your VCCA number on your profile.

On this site you must currently request member status. Eventually membership will be available in a realtime database and asking for permission will not be required. We all look forward to that day.

thanks, I have registered to access the rest of the site but still am not on access...vcca#44895...should i try again?

Hello-
I am having the same problem with access to the Members Area. My VCCA # is 6755 (this is posted in my profile as well). I assume that I would need to be manually given permission to the members area? Hopefully someone can initiate this process and notify me when this is completed.
thanks
Don Hampton

Don, I have changed your profile permissions and you should be able to access members only stuff it should show up when you log in