I am restoring a 31 5 window coupe . Apparently, I have lost the trunk floor- Yes ,I know--Its a long story. I would like a paper pattern so I can have one duplicated. There is at least 2 different floors (probally assembly plant or production date change?) One is a flat metal panel that sets on 2 wooden supports, which are an intergral part of the wood frame of the body,(, dividing the space between the outside sills into 3 equal dimensions.) My 31 does not have the wood supports-Instead there are two metal V shaped stiffening braces that are in the same location as the wood body braces. These stiffeners are only spotwelded to the floor panel and dosent not attach to the wood frame. I need the floor panel pattern showing locations of all screws and the access holes and, I also need the size,shape and exact location of the metal V stiffeners.Your assistance in helping me accurately duplicate the floor pan will be greatly appreciated Also any comments on the two variations would be of interest.Mel Goddard Lincoln Ne 402-421-1230 Or E-mail me at: Kgmg3aol