Distributor vacum line

You are not logged in. [Log In] VCCA Homepage » Forums » Mr. Goodwrench » Mechanical - Engine, Trans, etc » Distributor vacum line

Today's Birthdays

Featured Chat Guy (or Gal)

Charlie

Registered: 04/04/02
Posts: 2

VCCA Member's Photos

Member's Projects

Top Posters (over the past 30 Days)

Topic Options

Rate This Topic

#43694 - 07/06/05 06:31 PM Distributor vacum line
easy money Backyard Mechanic Registered: 01/10/03 Posts: 291 Loc: Penn Yan N.Y.	Where do I find the small steel line from the distributor to the carb on a 207 six ? Have found copper & plastic but no steel. Thanks _________________________ easymoney
Top

#43695 - 07/06/05 07:36 PM Re: Distributor vacum line
Mike McCagh Registered: 11/10/03 Posts: 1853 Loc: cumberland, md	why not make it? tubing benders relativly inexpensive as are flaring tools. mike
Top

#43696 - 07/06/05 07:38 PM Re: Distributor vacum line
Chev Nut Registered: 01/08/02 Posts: 14900 Loc: West Allis,Wi.	I think hes looking for a sorce for the 1/8" steel line....that little line could easily be bent by hand. Finding a flaring tool for the vacuum advance end may be a problem.( 1/8") _________________________ Chevgene
Top

#43697 - 07/08/05 06:36 PM Re: Distributor vacum line
easy money Backyard Mechanic Registered: 01/10/03 Posts: 291 Loc: Penn Yan N.Y.	Yes, where can I find 1/8 new steel line ? The original steel line had ferrules, there are easy to find , same used on copper line . Thanks _________________________ easymoney
Top

#43698 - 07/08/05 09:04 PM Re: Distributor vacum line
MrMack Registered: 12/14/01 Posts: 11880 Loc: Central Texas	Go here for steel 1/8" steel tubing. McMasters-Carr (page 107) type in 107 in the box at the top left of the home page, then scroll down to Roll-Formed Carbon Steel Coiled Tubing It is $15.98 for a 25' roll, buy it and you will have enough for both of us and a couple of friends! _________________________ Lone Star Region Chat Group Chapter member http://www.lsrclub.org Life's a long winding trail, ride a good horse!
Top

#43699 - 07/09/05 02:46 PM Re: Distributor vacum line
easy money Backyard Mechanic Registered: 01/10/03 Posts: 291 Loc: Penn Yan N.Y.	Thanks, MrMack I'll check it out. Thanks _________________________ easymoney
Top