Registered: 12/16/01
Posts: 1448
Loc: Glen Cove, NY
What is the designation, C10 G10.....? My book only lists them like that John 348/340 HP
_________________________
John, 1931 4 Door Sedan 1953 2 door 150 Sedan 1954 4 Door Belair Sedan (parts car) 1960 2 door Impala Hardtop 1962 2 door Impala Hardtop 1962 2 Door Biscayne Sedan 1985 Caprice Wagon (Too nice to call unrestored) 1990 Cavalier 4 small doors
OK...I have a 64 C20 3/4 T truck. To complete my front end rebuild I need inner tie rod ends. The filling station only lists them for a 1/2 T and I don't know if they are the same on 1/2 and 3/4. I also need an idler arm and a pitman arm. The picture shown in the filling stations' online catalog for the idler arm looks right but the picture for the pitman looks different than mine. My pitman arm has a ball joint on the control arm end whereas the pictured pitman does not.
Registered: 12/16/01
Posts: 1448
Loc: Glen Cove, NY
This is from a Chevrolet parts book printed in 1966. Seies 20 and 30 are the same, w/o 4wd the book says 8 5/8" from socket center to end. John 348/340HP
_________________________
John, 1931 4 Door Sedan 1953 2 door 150 Sedan 1954 4 Door Belair Sedan (parts car) 1960 2 door Impala Hardtop 1962 2 door Impala Hardtop 1962 2 Door Biscayne Sedan 1985 Caprice Wagon (Too nice to call unrestored) 1990 Cavalier 4 small doors