1938 Ignition - VCCA Chat

You are not logged in. [Log In] VCCA Homepage » Forums » Mr. Goodwrench » Electrical - 6 volt » 1938 Ignition

Today's Birthdays

Featured Chat Guy (or Gal)

Charlie

Registered: 04/04/02
Posts: 2

VCCA Member's Photos

Member's Projects

Top Posters (over the past 30 Days)

Topic Options

Rate This Topic

#231333 - 01/18/12 06:25 PM 1938 Ignition
timbeilby Grease Monkey Registered: 04/28/09 Posts: 13 Loc: Montana, USA	I need to replace the wire between the Ignition switch and the coil. This is the wire that is in the steel cover. I removed the tumbler which was no help. Tim #5049
Top

#231345 - 01/18/12 06:54 PM Re: 1938 Ignition [Re: timbeilby]
Junkyard Dog Registered: 11/23/01 Posts: 20041 Loc: Eagle Point, Oregon	To replace the electrolock wire you will have to remove the back of the lock cylinder housing with the armored cable. _________________________ The Mangy Old Mutt "If It's Not Junk.....It's Not Treasure!"
Top

#231459 - 01/19/12 02:28 PM Re: 1938 Ignition [Re: timbeilby]
Tiny Registered: 01/01/06 Posts: 2447 Loc: South Central Kansas	Originally Posted By: timbeilby I need to replace the wire between the Ignition switch and the coil. This is the wire that is in the steel cover. I removed the tumbler which was no help. Tim #5049 Tim, you must be the fellow I just spoke with on the phone. The book from the Filling Station will give you the step by step how to. It's money well spent. <CLICK> Edited by Tiny (01/19/12 02:30 PM) _________________________ VCCA Member 43216 1938 Business Coupe Before 1938 Business Coupe Now
Top