Pinstripe width - '34 Master

You are not logged in. [Log In] VCCA Homepage » Forums » Mr. Goodwrench » Body - Sheet Metal, Paint & Wood » Pinstripe width - '34 Master

Today's Birthdays

Featured Chat Guy (or Gal)

Charlie

Registered: 04/04/02
Posts: 2

VCCA Member's Photos

Member's Projects

Top Posters (over the past 30 Days)

Topic Options

Rate This Topic

#230742 - 01/13/12 08:22 AM Pinstripe width - '34 Master
Pat S Registered: 01/16/02 Posts: 778 Loc: Kapuskasing, ON	I'm sure this has been asked 47 times but my search skills are about the same as my mechanical skills.....zilch!!!! Here goes, what is the width of the beltline pinstripe on a '34 Master? _________________________ Best Regards, Pat
Top

#230758 - 01/13/12 09:22 AM Re: Pinstripe width - '34 Master [Re: Pat S]
jiaccino Registered: 11/25/02 Posts: 1373 Loc: tucson, az	Pat I have all that information at home. I can get with you over the weekend. Without an original Canadian car I can't be sure the information is correct for those cars. It may be the same. Joe
Top

#230813 - 01/13/12 07:32 PM Re: Pinstripe width - '34 Master [Re: jiaccino]
jiaccino Registered: 11/25/02 Posts: 1373 Loc: tucson, az	Pat Check your e-mail Thin moulding has a 1/32" stripe Wide moulding has 3 stripes Top & bottom are 1/32" Middle is 1/16" Spacing between the striping is 5/32" BTW, I checked the Canadian sedan delivery I have & there are still places I can see the original stripes so I guess Canada was the same. Hope that helps, Joe
Top