235 Cylinder head dimension

You are not logged in. [Log In] VCCA Homepage » Forums » Chevrolet 1942-1954 » 1949-54 » 235 Cylinder head dimension

Today's Birthdays

Featured Chat Guy (or Gal)

Charlie

Registered: 04/04/02
Posts: 2

VCCA Member's Photos

Member's Projects

Top Posters (over the past 30 Days)

Topic Options

Rate This Topic

#230189 - 01/09/12 03:03 PM 235 Cylinder head dimension
StoveboltSteve Shade Tree Mechanic Registered: 08/31/11 Posts: 43 Loc: Coopersville mi	Just purchased a rebuilt 235 cylinder head casting number 3835499, which according to my research is for a 50 to 52 235 powerglide. The head has been milled, but it was reconditioned 7 years ago, and the guy I bought it from does't remember how much it was milled. Does anyone know the stock cylinder head height? Also, how far does it have to be milled before I have to start being concerned with sinking the intake valve? _________________________ ....A little Mayberry living, could go a long way... Neil Young
Top

#231885 - 01/23/12 12:27 PM Re: 235 Cylinder head dimension [Re: StoveboltSteve]
StoveboltSteve Shade Tree Mechanic Registered: 08/31/11 Posts: 43 Loc: Coopersville mi	Found my answer on Inliners site. 4 inches thick give or take a few thou _________________________ ....A little Mayberry living, could go a long way... Neil Young
Top