I have a number of parts for 1932 and parts for 32 thru 36. Following is a partial list. Clutch/Brake pedal assembly, cleaned and painted - may need bushings $100, Valve cover painted Chevy Blue/gray $75, front door post brackets (at the sills) 75 for the pair, set of toe board plates $75. Other parts available. Prices DO NOT include shipping. 843-760-2519 or Neil_Linda_Hmsn.

Also have a complete 31 engine with no heads (has bell housing and clutch parts. $300.

I need a 1932 headlight bucket only, I have insides, and rim. Jim

Hi--just saw your post..I need 1 (one) 17 inch spoked rim 34-35 Chevrolet to complete my set. Any help? blue38

Sorry, I don't have an extra one. Try Grady Cox at chevy1948windstream.

Do you still have the door post plates and toe board brackets? If so, could you send pictures?

Thanks,
Scott

Scott,
Haven't been checking these post lately and didn't know you had ask the ?. Sorry about the failure to respond. Yes I have them and can send pictures. E-mail @ Neil_Linda_Hmsn
Neil

I am looking for the front bumper brackets for a 1930 Chevy coup. They are approximately 2 inches wide, 3/16" thick steel bar, bent over double in the center , with a 5/8" hole through both pieces for the attachment bolts to the front frame horns. The 5/8' holes sit just below the Main bumper brace bracket
Thanks
Steven
stpjepyahoo

I am looking for a 1932 exhaust manifold

I am looking for a good frame for a 32 do you have one or know of someone who does?
Thanks todd

I may have one, will check tomorrow. Please email me for contact info. delongxmsn

Hi. Do you still have the door pillar brackets and the toe board plates?

Thanks,
Scott

Posted on September 3rd, 2011:

I have tried emailing, but no response.

It looks like something was missing from the address. It should read Neil_Linda_Hmsn. Sorry for the delay. I am now back to a normal 40 hour week. As young as I am, those 60 to 70 hour 6 day work weeks were brutal.