testing a gm clock to see if it works

You are not logged in. [Log In] VCCA Homepage » Forums » Chevrolet 1961-1970 » 1965-70 » testing a gm clock to see if it works

Today's Birthdays

Featured Chat Guy (or Gal)

hairball48625

Registered: 08/21/08
Posts: 6

VCCA Member's Photos

Member's Projects

Top Posters

Topic Options

Rate This Topic

#177567 - 07/10/10 03:17 PM testing a gm clock to see if it works
foxhunter Shade Tree Mechanic Registered: 06/14/10 Posts: 56 Loc: missouri ozarks	i need to test a clock from a 1967 camero to see if it works. there are two conectors on the back and a light with wire but the wiring harness has the conector plus a ground frame connector. thx
Top

#177576 - 07/10/10 06:17 PM Re: testing a gm clock to see if it works [Re: foxhunter]
AntiqueMechanic Registered: 12/02/01 Posts: 7532 Loc: Vancouver, WA	Isolate the A+ connection and connect 12-volt + to that post. The negative wire can go to the frame of the clock. In a quite location, momentarily touch the negative wire to the frame of the clock. You should hear a snap when first connected. If not, you may have burned points inside the clock. _________________________ RAY Member Chat Group - Non-Geographical Region Chevradioman http://www.vccacolumbiariverregion.org/
Top

#177578 - 07/10/10 07:47 PM Re: testing a gm clock to see if it works [Re: AntiqueMechanic]
foxhunter Shade Tree Mechanic Registered: 06/14/10 Posts: 56 Loc: missouri ozarks	sorry but when it comes to electrical you are talking to a neophite. will this picture help? which is the a+?
Top

#177586 - 07/10/10 11:54 PM Re: testing a gm clock to see if it works [Re: foxhunter]
AntiqueMechanic Registered: 12/02/01 Posts: 7532 Loc: Vancouver, WA	The brass one on the left. Use the other terminal for the ground (-). (You could test the clock in the system. When you plug in the clock wiring harness it should produce the snap and start working.) _________________________ RAY Member Chat Group - Non-Geographical Region Chevradioman http://www.vccacolumbiariverregion.org/
Top

#177587 - 07/11/10 12:45 AM Re: testing a gm clock to see if it works [Re: AntiqueMechanic]
foxhunter Shade Tree Mechanic Registered: 06/14/10 Posts: 56 Loc: missouri ozarks	thanks ray bob
Top