1966/67 C10 V8 Motor Tech Info

You are not logged in. [Log In] VCCA Homepage » Forums » Chevrolet 1961-1970 » 1965-70 » 1966/67 C10 V8 Motor Tech Info

Today's Birthdays

None of any significance today.

Featured Chat Guy (or Gal)

Charlie

Registered: 04/04/02
Posts: 2

VCCA Member's Photos

Member's Projects

Top Posters (over the past 30 Days)

Topic Options

Rate This Topic

#177491 - 07/09/10 06:49 AM 1966/67 C10 V8 Motor Tech Info
66ChevPU Grease Monkey Registered: 07/09/10 Posts: 2 Loc: Norway - NATO	Hi just purchased a late 1966 Chevy C10 Step side PU with v8. Am trying to find the tech specs for 327/350 PU motor for 66/67 C10 ie. horse power, cubic inches etc also tune up info. CAN some one help with this ? Thanks DonBSki
Top

#177493 - 07/09/10 07:02 AM Re: 1966/67 C10 V8 Motor Tech Info [Re: 66ChevPU]
lucky1 Backyard Mechanic Registered: 12/30/05 Posts: 216 Loc: ontario	Looks like all have point gap of .019 and spark plug gap of .035 but timing depends on engine size, standard or automatic etc.May be 327 or 283?? Neil G. _________________________ have a nice day
Top

#177502 - 07/09/10 09:01 AM Re: 1966/67 C10 V8 Motor Tech Info [Re: lucky1]
66ChevPU Grease Monkey Registered: 07/09/10 Posts: 2 Loc: Norway - NATO	HI but am looking for tech specs for the 327 and 350 for PU of 1866/1967 like horse power, cubic inche etc.
Top

#177505 - 07/09/10 10:31 AM Re: 1966/67 C10 V8 Motor Tech Info [Re: 66ChevPU]
lucky1 Backyard Mechanic Registered: 12/30/05 Posts: 216 Loc: ontario	327 and 350 are cubic inches. My book does not list 350 for 1966-67 however. Neil _________________________ have a nice day
Top

#177523 - 07/09/10 07:00 PM Re: 1966/67 C10 V8 Motor Tech Info [Re: lucky1]
Chev Nut Registered: 01/08/02 Posts: 14900 Loc: West Allis,Wi.	In 1967 and 1968 the 350 was used in a Camaro only. _________________________ Chevgene
Top