Does anyone know where I can get a frame/rails for a 1932 Chevrolet? This would be an original, not a new one. Appreciate the help.

Hello Aloppen,
Can you be more specific? Car or truck? Job No? What do you mean by frame/rails? There are people here that would be glad to help but it would be easier if you would provide enough info to get the question off the ground. Thanks, Bill/ KC Wood

I don't mean to "hijack" your post aloppen, but I've been wondering the same thing.

I'm assuming you mean a bare chassis.

I have looked high and low for a chassis or just bare framerails for my '32 roadster and haven't had much luck. Only thing I found were some aftermarket "rodshop" chassis.

I have two frames for a 32. Will be using one to mount my extra 32 running gear on to have a rolling chassis and look for a body at a later date. But I am a long way away from you folks. You might try the G+D want adds. I put a want add in our Vintage Car Club of Canada magazine and ended up with the two frames within 2 days of the Mag coming out.

I have a '32 passenger frame and engine w/o cylinder head, has transmission, axles, springs and wheels all rusty and tightly stuck but the frame is good. Any offers?