65 chevelle upper control arm bushing

You are not logged in. [Log In] VCCA Homepage » Forums » Chevrolet 1961-1970 » 1965-70 » 65 chevelle upper control arm bushing

Today's Birthdays

Featured Chat Guy (or Gal)

hairball48625

Registered: 08/21/08
Posts: 6

VCCA Member's Photos

Member's Projects

Top Posters

Topic Options

Rate This Topic

#155963 - 11/05/09 07:14 PM 65 chevelle upper control arm bushing
broo102 Shade Tree Mechanic Registered: 05/20/09 Posts: 109 Loc: So Calif	Does anyone know of a way to replace an upper control arm without taking the upper control arm off? (bushing squeezed out) I was really surprized, I hardly drove the car since they were installed 5 years ago. I want to replace them with energy suspension bushings, but I dont want to have to take the whole thing apart. Anyone know how? Thanks Broo102 _________________________ Blessings Broo Deut. 7:12
Top

#156288 - 11/09/09 07:45 PM Re: 65 chevelle upper control arm bushing [Re: broo102]
jimpala70 Backyard Mechanic Registered: 07/19/06 Posts: 253 Loc: N.I.R.	Originally Posted By: broo102 Does anyone know of a way to replace an upper control arm without taking the upper control arm off? (bushing squeezed out) I was really surprized, I hardly drove the car since they were installed 5 years ago. I want to replace them with energy suspension bushings, but I dont want to have to take the whole thing apart. Anyone know how? Thanks Broo102 The control arm must be removed to replace bushings.
Top

#156307 - 11/10/09 02:54 AM Re: 65 chevelle upper control arm bushing [Re: jimpala70]
John 348/340HP Registered: 12/16/01 Posts: 1447 Loc: Glen Cove, NY	You can't push them on with an air chisel? I saw a guy do it to a 62 when I was kid. John _________________________ John, 1931 4 Door Sedan 1953 2 door 150 Sedan 1954 4 Door Belair Sedan (parts car) 1960 2 door Impala Hardtop 1962 2 door Impala Hardtop 1962 2 Door Biscayne Sedan 1985 Caprice Wagon (Too nice to call unrestored) 1990 Cavalier 4 small doors
Top

#156373 - 11/10/09 05:05 PM Re: 65 chevelle upper control arm bushing [Re: John 348/340HP]
jimpala70 Backyard Mechanic Registered: 07/19/06 Posts: 253 Loc: N.I.R.	Originally Posted By: John 348/340HP You can't push them on with an air chisel? I saw a guy do it to a 62 when I was kid. John Hi John, I have tried it and what usually happens is the control arm area around the bushing gets distorted/twisted.Even a small amount will make the replacement bushing very hard to put in and bolt into place.Especially if the modern poly style bushings are used like he has suggested. Jim
Top

#156821 - 11/16/09 06:48 PM Re: 65 chevelle upper control arm bushing [Re: jimpala70]
broo102 Shade Tree Mechanic Registered: 05/20/09 Posts: 109 Loc: So Calif	well I just dissambled it all, lower control arms needed bushings too. I installed new polys & now I cant get (lower) the #%$^& thing to line up to the holes. I greased them pretty good, got the rear hole lined up, (was dificult) but the front bushing just wont go in far enough!~ Any ideas out there?? Thanks Broo102 Edited by broo102 (11/16/09 06:49 PM) _________________________ Blessings Broo Deut. 7:12
Top