31 cabriolet reassembly

You are not logged in. [Log In] VCCA Homepage » Forums » Chevrolet 1912-1942 (Pre-War) » 1929-32 » 31 cabriolet reassembly

Today's Birthdays

Featured Chat Guy (or Gal)

mark47

Registered: 01/08/02
Posts: 68

VCCA Member's Photos

Member's Projects

Top Posters

Topic Options

Rate This Topic

#13502 - 07/19/05 11:53 AM 31 cabriolet reassembly
Mike McCagh Registered: 11/10/03 Posts: 1687 Loc: cumberland, md	there were 3 hinges per door. each hinge had two wood screws and a machine screw with anchor nut on back side of door jamb. on this cabriolet some of the 6 machine screws had a metal-washer-impregnated rubber cushion that slid on the machine screw before going thru door hinge and thru cowl wood framing and then threading into the anchor nut(if that's the correct description for the nut plate). i suspect all 6 machine screws had the rubber bumpper originally but only 4 remained on this ole chevy when i disassembled it . 4 or 6 boys? thanks, mike
Top

The Filling Station 1929-32

#13503 - 07/19/05 12:48 PM Re: 31 cabriolet reassembly
Mike McCagh Registered: 11/10/03 Posts: 1687 Loc: cumberland, md	ps: the rubber cushions referenced in the provious post are diamond shaped. can't find them in Steele or filling station catalogs. any thoughts on source? thanks, mike
Top

#13504 - 07/19/05 10:21 PM Re: 31 cabriolet reassembly
xxx Registered: 04/11/02 Posts: 4232 Loc: Florida	Anything here to help? http://fp1.antelecom.net/herb/gary04ru.htm _________________________ See the USA in your Chevrolet...
Top