Cleaning out my boneyard and a lot of this stuff has got to go. Most of the parts are from 1929-32 with some other mid-1930's and 1951 parts as well. Engines, transmissions, bumpers, rear axle assemblies, manifolds, radiators, valve covers, cylinder heads, front axles, rear fenders, front fenders, some body sheet metal and a ton of other stuff. If you are going to be in the Southern Oregon area this spring or summer stop by and check out the goodies! Give me a call! (541) 826-2177.

do you have any sheet metal for a 1928 2 door coach? looking for a cowl and other metal.

Sorry, no four-cylinder stuff. Just about everything is 1929-32, with some later parts in stock also.

Do you have a double bar front bumper for a 1931,a Potter trunk for a roadster, or Trico side mount mirrors? Thanks Clif Update I spoke to you on the phone/ Thanks for your time

Hi Clif! Ya, it was nice talking to you on the phone about your '31 roadster. As you know I did have a very nice (and complete) Potter trunk but I sold that about six months ago. Through our phone conversation you already know about the other items. If you need anything else give me a call.

I'm looking for cab corners and a rear window panel for a 34-35 truck.

Sorry, no truck parts.....just passenger car. The only truck stuff in the boneyard is a complete 1948 Chevrolet COE (cab over engine) and that is supposed to be hauled away sometime this week.

Also have a 1969 Caprice sport coupe parts car in the boneyard if anyone is interested. It's free and the car has a clear title. If no one wants it the car will be going to the wrecking yard after I remove some of the parts.

how bout a 29 sedan front cowl then?

The same cowl was used for the 1929 closed cars. However, there is an early 1929 and a late 1929 cowl. I had one of each. Both have been sold. I still have several 1930 cowls in stock however.

Regarding the 1969 Caprice, it was picked up by the wrecking yard about an hour ago. An hour before that the 1948 COE was hauled away by the new owner. Things have been jumping around here lately!

In digging around in the boneyard today I found a pair of 1928 front fenders (totally forgot that they were there). They are in primer but need work. $50 for the pair. Will not ship.

Also found that I have a complete 1948 216 engine. $125 for the whole thing. Again, will not ship.

Hi Junkyard Dog.

Would you have a 1932 rear gearbox cross member ,and rubber mount?(as per wanted add)

Also would you have a 1932 front engine mounting plate?

Thanks and regards
Jack

Hey Jack! There is a engine cross member in the boneyard and I will check it out today to see what year it is when I am in the boneyard working. I will get back to you later today or this evening. Same on the engine crankcase plate.

On the Transmission rubber mount, is yours missing completely or do you just want a new one? If you still have your old transmission rubber mount the Filling Station offers a vulcanizing service on the transmission rubber mount units.

Jack: I was out in the boneyard most of the day getting a 1951 Chevy 2-door parts car ready to go to a new home. While I was there I checked on the engine cross member that I have. It is for a 1929 and a 1930. Sorry!

Also, I checked on the engine crankcase plate as well and I have a stack of them. However, they all fit 1929-31. I do have a 1932 engine crankcase plate but it is on a 1932 short block that I have for sale unfortunately.

Thank you Junkyard Dog.

Yes a engine block is pretty useless without having
the mounting plate on it, as you can,t assemble the camshaft
into the egine without it.

I dont have the rear gearbox rubber mount at all. Have seen
that that the filling station rerubbers them,
Regards Jack

I'm interested in a 1931 transmission for my Chevy. Home 850 - 877-6698 and cell 850 508 -2563. Email petezeteaol
Thanks,
Peter

Hi Peter! I will look in the boneyard to see if I have one. I know I have several for 1929 and 1930. Also have three 1932 transmssions and one for a 1927 or 1928. Anyway, I will look tomorrow and then get back to you.

Hi Peter! While I was in the boneyard working today getting some stuff ready to go to the scrapyard I checked my transmission stock. Sorry, but there are no transmissions for 1931 passenger cars. Got several for 1929 and 1930, some for 1932 and a couple for the late four-cylinder cars and that's about it.

have you got a 34 gas tank apron for a standard 2 door sedan or a back section out of a 35 std? Thanks!!! Jim 662-380-1742

Nope, nothing like that in the boneyard. Everything left is for 1929-32 with some later stuff mixed in as well. Sorry.

Junkyard Dog,
I'm looking for a dust cover that will fit my 36' coupe (207 with a standard three-speed transmission). This is the cover that protects the teeth on the flywheel. Might you have one?

email is alaska4u1msn

Thanks for reading!


Jim

I have a really nice one for 1936, but it is for a Master and not a Standard.

Junkyard Dog,

According to my parts book, it may be possible for me to use the Master dust cover on my standard? I think the "standard" part number is 837870. I believe it has the same bolt hole pattern, except the "standard" cover has a 1 3/4 x 5/8 cutout in the flange. Do you think I could maybe alter yor master cover to fit the standard? Please let me know what you think, I just can't seem to find the cover I need. Thanks for any help! alaska4u1msn

Jim

Junkyard Dog,
I have a friend looking for a splash apron for his 32 coupe. You wouldn't happen to have one?

Do you have any parts for a 40 Special Deluxe Coupe?

Thank You

You have to be more specific. A gas tank splash apron, a running board splash apron or the radiator splash apron?

Sparky: Sorry, nothing for a 1940 Chevrolet. Most of the parts in the boneyard are 1929 thru 1932, with a couple of other odds and ends thrown in.

Sorry,, Radiator splash apron.

I did have one but it's gone. Sorry!

!

Hey Skip, By chance do you have a head for a 33?

Nope. I sold all of my cylinder heads (about 10 of them) to a fellow in Canada.

Thanks anyway Skip. A friend near me is looking for one. I guess when this sale is over you will have enogh room to build another shop! :)

I do now since my boneyard is almost empty. Still have a lot of 1929-32 stuff in the back area of the boneyard though.

Would you have a complete hood for a 29 3 window coupe? And if so would you be willing to ship it to Wisconsin.

Yes, I do have a 1929-30 hood in good restorable condition. However, it would be difficult to ship and the shipping would cost almost as much as the hood is worth since the box would hve to be oversize. I really prefer to have the hood picked up instead.

Hi, Do you have a smokers kit or sometimes called an ash reciever?
Thanks,
Mike

Yep, in my collection and it isn't for sale. Sorry!

I am looking for a pair of doors for a 1930 roadster delivery pickup. Also need top bows (or metal parts) for the same vehicle. Anything in your boneyard that might fit?

Thanks, Rick

Nope, sorry. The only doors I have are for a 1930 through 1932 closed cars.

Would you have any hinges for a roadster trunk lid? Forget the year.

Nope. Closed car parts only.

do you have a side mount tire lock?

Not for 1936.

Looking for the front mounting sheet metal brackets that the eng splash guards attach to. My 31 has 32 block in it and I sure could use the correct front mounts.

Thanks. Jim.

Those are already gone. Sorry!

hey jim
the FS has a listing for them. AF273. is that what your looking for???

Thanks for response BuggymanGP.
Thought I knew FS catalogue from end to end, but can't find that number under splash aprons, eng, eng mounts, or anywhere.
The mounts I need are the front ones that go on either side of the eng at front crossmember that the eng splash guards tie into. Need them for a 32 as the 31's don't work with the 32 block. Will have to do more looking at catalogue, old eyes don,t always catch what my mind is looking for.

Tks again.

Jim.

Jim: Go to www.fillingstation.com and on their homepage click on "Online Catalog". On the next page, under "search by part number" enter AF-273 and then click on "Go". The parts that you are looking for in their catalog will then come up.

junkyard dog, do you have any front bumper wing tips and the bars for a 41 Master Deluxe
thanks Jack

Sure don't. All of the parts in the boneyard are 1929-32 with a little bit of mid-1930's parts thrown in as well.

Gas tank 31 Coupe? Thanks!

I have a real nice gas tank for a 1930. There is also a gas tank in the boneyard for a 1931 but it is pretty well beat up.